HelloSIM
Pay for an eSIM with USDT BEP-20 on BNB Smart Chain
PaymentsNovember 5, 20267 min read

Pay for an eSIM with USDT BEP-20 on BNB Smart Chain

USDT BEP-20 runs on BNB Smart Chain, uses BNB for gas and shares the 0x address format with Ethereum. How to avoid the BEP-2 mix-up and pay for a HelloSIM eSIM correctly.


USDT BEP-20 is Tether on BNB Smart Chain, and it is one of the networks HelloSIM accepts for eSIM payments. At checkout you choose "Pay with crypto", select USDT on BNB Smart Chain on the payment page, and send the exact amount to the 0x address shown. The network fee is paid in BNB.

BEP-20 is often what people end up holding after buying USDT on an exchange, and it comes with two specific sources of confusion: an older, similar-sounding standard called BEP-2, and an address format shared with Ethereum and several other networks. Both are easy to handle once you know what to look for.

BNB Smart Chain in plain words

BNB Smart Chain, often shortened to BSC, is a blockchain that behaves much like Ethereum: the same kind of wallets, the same kind of smart contracts, the same 0x addresses. BEP-20 is its token standard, modelled on Ethereum's ERC-20. USDT on BSC is a BEP-20 token, so the labels you may meet on an exchange, such as BSC, BEP20 or BNB Smart Chain, normally refer to the same network.

Two other labels need a second look. "BNB Chain" on its own is a family name that covers more than one network, so make sure the option you pick says BNB Smart Chain, BSC or BEP-20 specifically. And some exchanges list opBNB, which is a different network and not one of the options on the payment page.

On the payment page, BNB Smart Chain appears for more than one coin, for example USDT, USDC and ETH. If USDT is what you are sending, select USDT and BNB Smart Chain together.

Get your Vietnam eSIM in 30 seconds

Instant delivery, 4G/5G speeds, no roaming bills.

€1.49+
View Vietnam plans →

BEP-20 is not BEP-2

Alongside BSC, the BNB ecosystem used to run a second network, BNB Beacon Chain, first launched as Binance Chain. Its token standard was BEP-2, its addresses began with bnb1, and deposits to exchanges often needed a memo. BNB Beacon Chain has since been retired, and BEP-2 is not one of the options on the payment page.

You will still come across BEP-2 in older tutorials, forum answers and screenshots. If a guide tells you to add a memo to a BSC transfer, or shows an address beginning with bnb1, it is describing the old chain. For a HelloSIM payment, the details on the payment page are the only ones that count: enter a memo only if the page asks for one.

One 0x address, several networks

A BSC address looks exactly like an Ethereum address: 0x followed by 40 characters. The same string is also valid on Arbitrum, Polygon and Avalanche C-Chain. If you control an address, you control it on all of those networks at once, which is why one wallet can show balances on several of them under a single address.

That is convenient for you and risky for a payment. A wallet or exchange will accept the payment page's address on any of these networks without a warning, because it is a valid address on each. The payment request, however, is waiting on one network only, BNB Smart Chain in this case. USDT sent to the same address on Ethereum or Polygon lands on a different ledger, where the request is not looking for it, and nobody can promise that it can be recovered.

The fix is simple and needs doing every time. Before you confirm, read the network name in your wallet or on the withdrawal form and check that it says BNB Smart Chain, BSC or BEP-20.

Keep some BNB for gas

From a self-custody wallet, every BSC transfer needs BNB on BNB Smart Chain to pay the network fee; USDT alone is not enough. Fees on BSC are usually small, but they change with demand and are paid on top of the USDT amount.

A few practical points:

  • The BNB has to be on BSC itself, in the wallet that signs. BNB sitting on an exchange or on another network does not pay gas for you.
  • Before a trip, check that your BNB balance covers a few transfers. If you later want to top up data with crypto, you will need gas again.
  • If you buy USDT on an exchange in order to pay with it, withdraw a little BNB to the same wallet at the same time, choosing BSC as the network.

From an exchange you do not need BNB, because the exchange covers the gas and charges a withdrawal fee. That fee is often subtracted from the amount you type, and the figure that arrives must match the payment page, so read the line showing the received amount before you confirm.

Paying with USDT BEP-20, step by step

  1. 1Choose a plan and start checkout on the HelloSIM website or in the app. Enter the email address for the eSIM; an account is optional.
  2. 2Select "Pay with crypto", then USDT and BNB Smart Chain on the payment page. You will see the address, a QR code and the exact amount, and the request stays open for 1 hour.
  3. 3Open your wallet on BNB Smart Chain, or your exchange's withdrawal screen, and choose USDT.
  4. 4Scan or paste the address, then compare the first, middle and last characters with the page.
  5. 5Enter the exact amount, including every decimal shown, and confirm that the network reads BSC, BEP-20 or BNB Smart Chain.
  6. 6Send, then keep the transaction hash. BscScan, the BSC block explorer, shows its status.

After you send

Your eSIM is delivered once the payment is confirmed on the blockchain, usually quickly on fast networks and longer when a network is busy. The QR code is emailed to you and also appears in your account and the HelloSIM app.

If something does not look right, such as a transfer on the wrong network, a short amount after an exchange fee, or a payment sent after the request expired, contact HelloSIM support at [email protected] or on WhatsApp with your order email, the coin, the network and the TXID. Answers come within 24 hours. Please do not send a second payment to make up for the first.

Install the eSIM over Wi-Fi before you leave. It is data-only, runs next to your home SIM, and its validity begins when it first connects at your destination. Like every crypto payment, a BSC transfer cannot be reversed like a card chargeback, and the sale is final once the eSIM is delivered, so the extra moment spent reading the network name is well worth it.

Get your Asia Pacific eSIM in 30 seconds

Instant delivery, 4G/5G speeds, no roaming bills.

€1.99+
View Asia Pacific plans →

Frequently asked questions

Is USDT BEP-20 the same as USDT on BNB Smart Chain?
Yes. BEP-20 is the token standard of BNB Smart Chain, so exchanges may label the same network BSC, BEP20 or BNB Smart Chain. Select USDT and BNB Smart Chain on the payment page.
Can I pay with USDT BEP-2?
No. BEP-2 belonged to BNB Beacon Chain, which has been retired, and it is not offered on the payment page. Use BEP-20 on BNB Smart Chain or another listed network instead.
My wallet shows the same 0x address on Ethereum and BSC. Does it matter which one I send on?
Yes, a great deal. The address is valid on both, but the payment request only watches the network you selected, so USDT sent on another network may never be credited and recovery cannot be guaranteed.
Do I need BNB to send USDT BEP-20?
From your own wallet, yes: gas on BNB Smart Chain is paid in BNB, and that BNB must be on BSC. From an exchange, the exchange pays the gas and charges a withdrawal fee instead.
Should I add a memo when paying with USDT BEP-20?
Only if the payment page shows one. Memos were common with the old BEP-2 standard, and advice to add one usually comes from guides written for it.
What does opBNB mean on my exchange's withdrawal screen?
opBNB is a separate network from BNB Smart Chain and is not one of the payment page's options. Pick BSC, BEP-20 or BNB Smart Chain instead.

Get your Vietnam eSIM in 30 seconds

Instant delivery, 4G/5G speeds, no roaming bills.

€1.49+
View Vietnam plans →
H

HelloSIM

Published November 5, 2026