HelloSIM
Pay for an eSIM with SafePal: App, Hardware Wallet and QR Signing
PaymentsNovember 5, 20267 min read

Pay for an eSIM with SafePal: App, Hardware Wallet and QR Signing

Paying for a HelloSIM eSIM with SafePal can involve several QR codes. Which one does what, how to pick the chain and what to check on the device screen before approving.


SafePal can pay for a HelloSIM eSIM either as a software wallet in the SafePal app or with the app paired to a SafePal hardware device. Select "Pay with crypto" at checkout, pick the matching coin and network for your SafePal balance on the payment page, and send precisely the amount it shows to the address it displays. With an air-gapped hardware wallet, the transaction is signed through a short exchange of QR codes between the app and the device, so it pays to know which code is which before you begin.

SafePal makes several devices and updates its app regularly, and the flow differs between models. The steps below are generic; for your exact model, follow SafePal's own guides.

Three QR codes, three different jobs

On an air-gapped SafePal device, such as the S1 series, one payment can involve three QR codes:

  1. 1The payment QR code on the HelloSIM payment page. You scan it with the SafePal app on your phone to fill in the address. It has nothing to do with signing.
  2. 2The unsigned transaction shown by the SafePal app once you have filled in the details. The hardware device scans it with its own camera, then shows you what you are about to sign.
  3. 3The signed transaction shown by the device once you approve. The app scans it and broadcasts the transaction to the network.

Keep that order in your head and the flow stops feeling strange. Your private keys stay on the device throughout; only the transaction details and the signature travel by QR. Some SafePal devices can also connect in other ways, for example over Bluetooth, and the software wallet signs inside the app, so you may see fewer codes. The checks that matter stay the same.

Get your Europe eSIM in 30 seconds

Instant delivery, 4G/5G speeds, no roaming bills.

€1.49+
View Europe plans →

Pick the chain inside the SafePal app

SafePal lists coins by chain, and the same token can appear more than once, for example USDT on TRON, on BNB Smart Chain and on Ethereum, each a separate balance. Open the one you intend to spend and note its network. That network, together with the coin, is what you select on the HelloSIM payment page.

If the asset you need is not visible, add it to your wallet's coin list in the app. With a hardware wallet, the app may ask you to sync with the device or confirm the change on it; follow its prompts. Do all of this before you start checkout; once a payment request exists, you have 1 hour to pay it.

Take particular care with the Ethereum-style chains. Payment addresses on the five that HelloSIM accepts (Ethereum, BNB Smart Chain, Polygon, Arbitrum, Avalanche C-Chain) all begin with 0x, so the app will accept one whichever of those chains you send from. Only the chain you send on decides where the coins end up, and a payment on a different network from the one shown can fail or get stuck.

Keep the fee coin next to the token

Network fees are paid in each chain's native coin, and a hardware wallet changes nothing about that: the fee coin must be in the same SafePal wallet, on the same chain. USDT on BNB Smart Chain needs BNB there; USDT on TRON needs TRX; on Ethereum or Arbitrum it is ETH on that network; on Polygon, POL; on Avalanche, AVAX; on Solana, SOL. If what you are paying with is the native coin itself, say BNB or TRX, the fee comes from the same balance, so keep a little extra.

The SafePal app estimates the fee when you build the transaction, and a hardware device usually shows it again before you approve. The fee is added on top of the amount, which is what you want: the payment address should receive the full figure from the payment page.

Step by step with a SafePal hardware wallet

  1. 1Get the device ready first. Charged, your PIN to hand, firmware and app up to date. A firmware update in the middle of a payment eats into the hour.
  2. 2Start checkout. Select a plan on the website or in the HelloSIM iPhone app, type the delivery email and choose "Pay with crypto", then set the coin and network to match your SafePal asset.
  3. 3Build the send in the app. Open the matching asset, start a send, and scan the payment QR code or paste the address.
  4. 4Type the amount exactly as the payment page states it, down to the last decimal.
  5. 5Pass the transaction to the device. Scan the app's QR code with the device, or connect the way your model requires.
  6. 6Check and approve on the device, as described in the next section.
  7. 7Return the signature. Scan the device's signed QR code with the app, and the app broadcasts the payment.

Scanning works best in good light, with both screens held steady and the brightness turned up. If a scan keeps failing, it is fine to cancel and start over: nothing is sent until the app broadcasts the signed transaction.

What to read on the device screen

The hardware screen is designed to be the one display in this process that malware on your phone or laptop cannot alter, which is the whole point of using a device. Treat it as the final check:

  • Recipient address. Compare it with the payment page, not with the app. Check the start, the end and a stretch in the middle.
  • Amount. It must equal the figure on the payment page, with the same decimals. A rounded or truncated amount can make the payment arrive short.
  • Coin and chain. The device should show the asset you meant to send, on the chain the payment page names.
  • Fee. Make sure it looks reasonable for the network.

If anything differs, reject the transaction on the device and start again from the app. Crypto payments cannot be reversed like a card chargeback, so this moment is your safety net.

Using the SafePal app on its own

If you use the SafePal software wallet without a device, the flow is shorter: steps 5 to 7 disappear, and the app signs and sends after you confirm. The checks then move to the app's confirmation screen. Read the address, amount, coin, chain and fee there with the same care, because on a phone there is no second screen to catch a mistake.

After the payment is broadcast

The transaction shows in the asset's history in the SafePal app, and from there a block explorer view gives you the transaction hash (TXID). HelloSIM issues the eSIM after the blockchain confirms the payment; on a fast network that usually happens quickly, while a crowded one can take a while. The eSIM QR code comes by email and is also in your account and the app.

If the payment went out on the wrong network, in the wrong coin or short, don't send again. Email [email protected] or use HelloSIM's WhatsApp, including the TXID, the coin and network, and the email on the order. Install the eSIM over Wi-Fi before your trip. Because the plan carries data only, your usual SIM keeps receiving calls and SMS codes, and validity starts only when the eSIM first connects at your destination.

Get your Global eSIM in 30 seconds

Instant delivery, 4G/5G speeds, no roaming bills.

€105.99+
View Global plans →

Frequently asked questions

Can I pay for a HelloSIM eSIM with a SafePal hardware wallet?
Yes. You build the send in the SafePal app, sign it on the device and let the app broadcast it, using the coin, network, address and amount from the payment page.
Which QR code do I scan with the SafePal device?
The device scans the unsigned transaction that the SafePal app displays, not the HelloSIM payment QR code. The payment QR is scanned by the app to fill in the address.
What should I check on the SafePal screen before approving?
The recipient address against the payment page, the exact amount with all decimals, the coin and chain, and the fee. Reject the transaction if anything differs.
Why can't I send USDT from SafePal?
Usually because the wallet holds none of the chain's own coin for the fee, for example BNB on BNB Smart Chain or TRX on TRON. Add a little to the same wallet on that chain.
Is there a time limit when paying with a hardware wallet?
The payment request stays open for 1 hour, so charge and update the device before you start checkout. If the request expires before you send, create a new payment at checkout.
What if my SafePal payment went out on the wrong network?
Contact support at [email protected] or on WhatsApp with your order email, coin, network and TXID. Recovery of a wrong-network payment can't be guaranteed.

Get your Europe eSIM in 30 seconds

Instant delivery, 4G/5G speeds, no roaming bills.

€1.49+
View Europe plans →
H

HelloSIM

Published November 5, 2026